mechanical arm
英 [məˈkænɪkl ɑːm]
美 [məˈkænɪkl ɑːrm]
机械手
双语例句
- From a red puddle of liquid plastic, a three-dimensional sphere of connected hexagons and pentagons begins to rise, taking only six minutes to be lifted by mechanical arm into its final geometric form.
从一块液体塑料材质的红色胶泥中，一个由六边形和五边形连接而成的三维球体开始升起，机械手臂只用了6分钟就让它呈现最终的几何形状。 - Analysis and Design of a Novel 6-DOF Hybrid Mechanical Arm
新型6-DOF串并混联拟人机械臂的性能分析与设计 - The movement of the mechanical arm, directed by the transplanted nerve, is as intuitive as the motion of a natural arm.
由移植神经掌控的机械手臂，能如自然胳膊成为直观的运动。 - We put in a mechanical arm, and now it works just as if it were her own!
我们给她安装了一只机械手，它现在有如她自己的手臂一样。 - In view of the rigid link flexible joint, the industry mechanical arm which actuates by the flexible planet gear, this paper proposed one kind of new modeling and the computational method.
针对带刚性连接挠性接头、以柔性行星齿轮驱动的工业机械臂，提出了一种新的建模和计算方法。 - The mechanical arm is movably arranged on the track and is used for conveying the chip carrier between the chip load port and the overhead conveying system.
以及一机械手臂，可移动式设置于该轨道，用以在该高架传输系统以及该芯片载入埠之间传送该芯片承载装置。 - The teaching and playback functions of mechanical arm are realized on the basis of Siemens S7-200 programmable logic controller.
提出一种基于西门子S7-200可编程控制器实现机械手运动的示教与再现功能的设计方法。 - Design and Dynamic Characteristic Research of Month Soil Sampling Mechanical ARM
月壤采样机械臂设计及动态特性研究 - Finally, each robot is equipped with a mechanical arm that it can use to pick up and put down beepers.
最后，每个机器人配备了一个机械手臂，它可以使用到拿起和放下寻呼机。 - Design and configuration process about the control system of a mechanical arm are introduced based on MCGS configuration software and Siemens S7-200 Series Programmable Logic Controller;
介绍了基于MCGS组态软件与西门子S7&200系列可编程序控制器的机械手控制系统设计及控制系统的组态过程； - Kinematics Analysis and the Jacobian Matrix Solution for a Four Degree of Freedom ( 4-DOF) Mechanical Arm
四自由度机械手臂运动学分析及雅可比矩阵求解 - The mechanism design of a nonholonomic open-chained mechanical arm
一种非完整开链机械手臂的传动机构设计 - Model reference adaptive dual control for four-degrees of freedom mechanical arm
四自由度机械臂的模型参考自适应双重控制 - The computer learns as data from the multiple sensors is sorted into reproducible patterns that will provide input to the individual motors of the mechanical arm.
计算机的学习方式，是自将来自多个传感器需输入至机械手臂各自驱动马达的数据排序成重现模式中来学习。 - Kinematics Simulation of Mechanical Arm Based on ADAMS
基于ADAMS的机械手臂运动仿真分析 - Study of the Remote Monitoring System Based on Four-DOF Mechanical Arm
基于四自由度机械臂远程监控系统的研究 - The problem of use safety of the gas is mainly solved by installing a gas leak alarm device, a mechanical arm controlled by an alarm and an electromagnetic valve.
燃气使用安全问题主要靠安装燃气泄漏报警器、报警器控制的机械手、电磁阀来解决。 - For the sake of insuring the mechanical arm would not be damaged under the working condition of launching, a reliable locking was carried out by the use of belting typed lock-unlock mechanism.
空间机械臂在发射时承受极为恶劣的载荷环境，为确保机械臂在发射工况下不被损坏，利用包带式锁解机构对其进行了可靠锁紧。 - The working principle of mechanical arm was drew up, the dynamics equation of mechanical arm being controlled was established, the gain of PD controller was designed by the use of optimized algorithm, and the rigid body dynamics response of mechanical arm under different angles was calculated.
拟订了机械臂的工作原理，建立了机械臂的受控动力学方程，运用优化算法设计了PD控制器的增益，计算了机械臂在不同角度下的刚体动力学响应。 - The measurement system by PSD for a vibration of extremity of a flexible mechanical arm is described, including measurement principle, optical system, PSD circuit and system calibration.
讲述了用PSD构造柔性臂末端振动测量系统的设计与实现过程，包括测量原理，光学系统的构造，PSD的后续处理电路和系统标定等。 - This article take the nappe flexible mechanical arm as an example, has carried on the static state and the dynamic characteristic analysis through the finite element analysis, In the static property research, obtained its curving strength-distortion curve;
本文以叠层矩形截面柔性机械臂为例，通过有限元分析数值仿真进行了静态和动态的特性分析，静态特性研究中得到了其弯曲的力&变形曲线； - This system consists of mechanical arm, headset, image processing computer and correlative software.
该系统由数字化机械臂、头部定位装置、图像处理计算机及相关软件组成。 - Specially, the designs of cut set and mechanical arm in the roll and cut equipment were anal-ysed in detail.
特别是对卷切装置中的切割装置和机械手的设计，作了详细分析。 - Furthermore, this thesis pay more attention to the design and control system of the power feedback mechanical arm.
重点研究了力反馈机械臂的设计和控制系统。 - Grasping moving object by Mechanical Arm is widely used in industrial production, aerospace and military application fields.
机械臂抓取运动目标在工业生产、航天和军事应用领域有广泛的应用，是发展和测试机器视觉与机械臂控制技术中极具挑战性的研究课题。 - The structure of the robot workstation and control system are discussed. Also the positioning of special-shaped steel and mechanical arm are preliminary designed. The function of operation button on console is determined.
对异型钢的移位定位进行了初步设计，对锚固件上料机械手进行了原理设计，初步确定了操作台的操作按钮功能，整个机器人工作站系统由PLC控制。 - Solve dynamic equation of rigid mechanical arm and flexible manipulator, and compare difference when reflecting arm frame kinetics characteristics, grope for the motion characteristics of the mechanical arm system, and borrow ADAMS software to have a comparative analysis.
通过对所推导的刚性机械臂和柔性机械臂动力学方程的数值求解，比较了二者在反映臂架动力学特性方面的差异，摸索了机械臂系统的运动特性，并借用ADAMS软件进行了对比分析。 - Because arm frame is driven by hydraulic cylinder, the problem of coupling effect between the hydraulic cylinder and mechanical arm, borrows the concept of Jacobian matrix in robot kinematics, and gives the specific compute method.
由于臂架是通过液压缸来驱动的，液压缸与机械臂之间的耦合作用问题，借用了机器人运动学中驱动Jacobian矩阵的概念，并给出了其具体计算方法。 - The principle of harvesting robot is the use of vision technology and mechanical arm robot composed of visual servo control system for target identification and picking.
采摘机器人其原理是利用机器人视觉技术与机械手臂组成视觉伺服控制系统进行目标识别与采摘。 - Firstly, the self-location flexible transmission mechanical arm is developed based on the flexible transmission system and the self-location mechanical arm.
首先，在自定位机械臂和柔性传动系统的基础上，提出了自定位柔性传动机械臂研制方案。